uboot

Fork

imx: imx7d-sdb: prepare to synchronise device trees with linux

As a preparatory step remove the epdc reference which does not exist in
the Linux upstream device tree and rename the qspi1 reference to qspi as
this is how it is named in the Linux upstream device tree.

This avoids the following error once synchronised:

+Error: arch/arm/dts/.imx7d-sdb-qspi.dtb.pre.tmp:10.1-6 Label or path
epdc not found
+Error: arch/arm/dts/.imx7d-sdb-qspi.dtb.pre.tmp:29.1-7 Label or path
qspi1 not found
+Error: arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi:6.1-7 Label or path
qspi1 not found

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

imx: imx7-cm: prepare to synchronise device trees with linux

As a preparatory step rename the qspi1 reference to qspi as this is how
it is named in the Linux upstream device tree.

This avoids the following error once synchronised:

+Error: arch/arm/dts/.imx7-cm.dtb.pre.tmp:96.1-7 Label or path qspi1 not
found

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

colibri-imx6ull/-emmc: synchronise device tree with linux

Synchronise device tree with linux v5.19-rc5.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device trees we are now using the
regular ones for the Colibri Evaluation (carrier) board V3 (e.g.
imx6ull-colibri-eval-v3.dtb rather than the previous imx6ull-colibri.dtb
and imx6ull-colibri-emmc-eval-v3.dtb rather than the previous
imx6ull-colibri-emmc.dtb).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

imx6ul/imx6ull: synchronise device trees with linux

Synchronise device trees with linux v5.19-rc5.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

imx: mx6ul_14x14_evk: prepare to synchronise device trees with linux

As a preparatory step remove the qspi node with its flash0 label as this
is already in the Linux upstream device tree.

This avoids the following error once synchronised:

+arch/arm/dts/imx6ul-14x14-evk.dtb: ERROR (duplicate_label):
/soc/bus@2100000/spi@21e0000/n25q256a@0: Duplicate label 'flash0' on
/soc/bus@2100000/spi@21e0000/n25q256a@0 and
/soc/bus@2100000/spi@21e0000/flash@0

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

colibri_imx6: synchronise device tree with linux

Synchronise device tree with linux-next next-20220708.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Colibri Evaluation (carrier) board V3 (e.g.
imx6dl-colibri-eval-v3.dtb rather than the previous imx6-colibri.dtb).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

apalis_imx6: synchronise device tree with linux

Synchronise device tree with linux-next 20220706.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Apalis Evaluation (carrier) board (e.g.
imx6q-apalis-eval.dtb rather than the previous imx6-apalis.dtb).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

imx6dl/imx6qdl: synchronise device trees with linux

Synchronise device trees with linux-next next-20220708.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

tbs2910: prepare to synchronise device trees with linux

As a preparatory step make sure to refer to absolute node paths where
labels were removed in Linux upstream.

This avoids the following error once synchronised:

+Error: arch/arm/dts/imx6q-tbs2910-u-boot.dtsi:3.1-7 Label or path aips1
not found
+Error: arch/arm/dts/imx6q-tbs2910-u-boot.dtsi:11.1-5 Label or path soc
not found

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

imx6: aristainetos: fix pwms property warnings

Fix the following build-time pwms property warnings:

w+arch/arm/dts/imx6dl-aristainetos2c_7.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-aristainetos2c_cslb_7.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

board/BuR/brppt2: fix pwms property warning

Fix the following build-time pwms property warning:

w+arch/arm/dts/imx6dl-brppt2.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

toradex: common: Improve product/serial print during boot

Add product id print in show_board_info(), with an increasing number of
Toradex SKUs available with small differences it makes sense to print it.

Move serial number print to a dedicated line, this prevents the previous
line with the product name to overflow the 80 columns with any
reasonable product name length.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

toradex: tdx-cfg-block: Use official SKU names

Up to now in the code we named Toradex SKUs in a slightly different way
compared to the official product name, start using the official names
from now on to avoid misunderstanding.

This has also the nice benefit of the string being shorter, allowing
to fit nicely in 80 columns even adding the product ID when printing
the hardware information.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

toradex: common: Remove #ifdef usage for 2nd ethaddr

Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)`
instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

toradex: common: Remove stale function declaration

Remove stale show_boot_logo() declaration, not used anywhere.

Fixes: e6fd30dd9eef ("toradex: drop legacy show_boot_logo function and use splashscreen")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

toradex: tdx-cfg-block: Cleanup interactive cfg block creation

Simplify interactive config block creation code, instead of having a
a long list of questions and a complex tree of preprocessor directive to
guess the exact SKU, just ask the user to select it from a list.

The modules list is filtered out to include only SKUs that are supported
by the specific u-boot binary in execution.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

toradex: common: Use ARRAY_SIZE macro

Use generally available ARRAY_SIZE macro, instead of hand-coding it
every time is needed.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

toradex: common: Remove stale comments about modules availability

Remove comment "not currently on sale" on specific SKUs, this
information does not belong to the code and will never be accurate.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

toradex: tdx-cfg-block: add 0068 i.mx 8m mini sku

Add new i.MX 8M Mini SKU to ConfigBlock handling.

0068: Verdin iMX8M Mini Quad 2GB WB IT No CAN

This SKU is identical to 0055 but without CAN. Mention this in the name
so those modules can be distinguished.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

imx8mm: Sync device tree with linux-next 20220711

Sync imx8mm.dtsi device tree with linux-next 20220711.

The main motivation for doing this sync is the sha256 regression
reported by Andrey Zhizhikin [1].

The linux-next kernel has the following commit, which disables
the job ring 0 and fixes the problem:

https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20220715&id=dc9c1ceb555ff661e6fc1081434600771f29657c

[1] https://lore.kernel.org/u-boot/AM6PR06MB46912207D9460CD9924F35DAA68B9@AM6PR06MB4691.eurprd06.prod.outlook.com/T/#t

Signed-off-by: Fabio Estevam <festevam@denx.de>

doc: board: nxp: Add instructions to boot from QSPI

Add instructions to build and boot from QSPI Flash

Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>

phy: ti: j721e-wiz: use OF data for device specific data

Move device specific data into OF data structure so it
is easier to maintain and we can get rid of if statements.

Based on: https://lore.kernel.org/linux-phy/20220526064121.27625-1-rogerq@kernel.org/T/#u

Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Matt Ranostay <mranostay@ti.com>

configs: am62x_evm_r5: Add support for ESM

Enable ESM driver for AM62x in R5 SPL/u-boot build.

Signed-off-by: Julien Panis <jpanis@baylibre.com>

arm64: mach-k3: am625_init: Probe ESM nodes

On AM62x devices, main ESM error event outputs can be routed to
MCU ESM as inputs. So, two ESM device nodes are expected in the
device tree : one for main ESM and another one for MCU ESM.
MCU ESM error output can trigger the reset logic to reset
the device when CTRLMMR_MCU_RST_CTRL:MCU_ESM_ERROR_RESET_EN_Z is
set to '0'.

Signed-off-by: Julien Panis <jpanis@baylibre.com>

arm64: dts: k3-am625-r5: Add support for ESM devices

Add main ESM and MCU ESM nodes to AM625-R5 device tree.

Signed-off-by: Julien Panis <jpanis@baylibre.com>

arm: apple: Add initial Apple M2 support

Apple's M2 SoC very similar to the M1 and can use the same memory map.
The keyboard/trackpad on the MacBook Pro (13-inch, M2, 2022) uses
"dockchannel" as transport instead of SPI and needs a new driver.
USB, NVMe, uart, framebuffer and watchdog are working with the existing
drivers.

Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>

iommu: Add M2 support to Apple DART driver

"apple,t8112-dart" uses an incompatible register interface but still
offers the same functionality. This DART is found on the M2 and M1
Pro/Max/Ultra SoCs.

Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>

board: freescale: Add entry for imx8mm_evk_fspi_defconfig

Add entry for imx8mm_evk_fspi_defconfig in
board/freescale/imx8mm_evk/MAINTAINERS

Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>

configs: imx8mm: Define CONFIG_SYS_UBOOT_BASE for i.MX8m

The macro `CONFIG_SYS_UBOOT_BASE` is used by SPL loaders `"NOR"` and
`"XIP"` to determine the base address of u-boot.

For `"NOR"` on i.MX8MM it is the base address of QSPI0 plus the offset
of the flattened image tree blob.
Although `QSPI0_AMBA_BASE` is used to define CONFIG_SYS_UBOOT_BASE in
multiple board header files for i.MX8MM, it is not specified.

Specify offset of flattened image tree blob (needs to be set to same
value as specified in 'binman' node), base address of QSPI0 and size of
FlexSPI configuration block.

Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>

board: freescale: Add QSPI Boot support in spl for i.MX8m

Add QSPI Boot option in u-boot-spl for i.MX8m EVK.

Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>