qemu RX

Fork

scripts: Explain the difference between linux-headers and standard-headers

If you don't know it, it's hard to figure out the difference between
the linux-headers folder and the include/standard-headers folder.
So let's add a short explanation to clarify the difference.

Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>

MAINTAINERS: Remove myself (for raspi).

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: MW4PR21MB1940E8BB52F4053C943B1FCD9E219@MW4PR21MB1940.namprd21.prod.outlook.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MAINTAINERS: Add an entry for Xilinx Versal OSPI

List myself as maintainer for the Xilinx Versal OSPI controller.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220121161141.14389-11-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI

Connect Micron Xccela mt35xu01g flashes to the OSPI flash memory
controller.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220121161141.14389-10-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/block/m25p80: Add support for Micron Xccela flash mt35xu01g

Add support for Micron Xccela flash mt35xu01g.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220121161141.14389-9-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-versal: Connect the OSPI flash memory controller model

Connect the OSPI flash memory controller model (including the source and
destination DMA).

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220121161141.14389-8-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/ssi: Add a model of Xilinx Versal's OSPI flash memory controller

Add a model of Xilinx Versal's OSPI flash memory controller.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-7-francisco.iglesias@xilinx.com
[PMM: fixed indent]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/dma/xlnx_csu_dma: Support starting a read transfer through a class method

An option on real hardware when embedding a DMA engine into a peripheral
is to make the peripheral control the engine through a custom DMA control
(hardware) interface between the two. Software drivers in this scenario
configure and trigger DMA operations through the controlling peripheral's
register API (for example, writing a specific bit in a register could
propagate down to a transfer start signal on the DMA control interface).
At the same time the status, results and interrupts for the transfer might
still be intended to be read and caught through the DMA engine's register
API (and signals).

This patch adds a class 'read' method for allowing to start read transfers
from peripherals embedding and controlling the Xilinx CSU DMA engine as in
above scenario.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-6-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

include/hw/dma/xlnx_csu_dma: Add in missing includes in the header

Add in the missing includes in the header for being able to build the DMA
model when reusing it.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-5-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-versal: Connect Versal's PMC SLCR

Connect Versal's PMC SLCR (system-level control registers) model.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-4-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-versal: 'Or' the interrupts from the BBRAM and RTC models

Add an orgate and 'or' the interrupts from the BBRAM and RTC models.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-3-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc: Add a model of Versal's PMC SLCR

Add a model of Versal's PMC SLCR (system-level control registers).

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-2-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

rtc: Move RTC function prototypes to their own header

softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff(). Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them. Move them to their
own header, a new include/sysemu/rtc.h.

Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.

The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

hw/char/exynos4210_uart: Fix crash on trying to load VM state

The exynos4210_uart_post_load() function assumes that it is passed
the Exynos4210UartState, but it has been attached to the
VMStateDescription for the Exynos4210UartFIFO type. The result is a
SIGSEGV when attempting to load VM state for any machine type
including this device.

Fix the bug by attaching the post-load function to the VMSD for the
Exynos4210UartState. This is the logical place for it, because the
actions it does relate to the entire UART state, not just the FIFO.

Thanks to the bug reporter @TrungNguyen1909 for the clear bug
description and the suggested fix.

Fixes: c9d3396d80fe7ece9b
("hw/char/exynos4210_uart: Implement post_load function")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/638
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220120151648.433736-1-peter.maydell@linaro.org

hw/armv7m: Fix broken VMStateDescription

In commit d5093d961585f02 we added a VMStateDescription to
the TYPE_ARMV7M object, to handle migration of its Clocks.
However a cut-and-paste error meant we used the wrong struct
name in the VMSTATE_CLOCK() macro arguments. The result was
that attempting a 'savevm' might result in an assertion
failure.

Cc: qemu-stable@nongnu.org
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/803
Fixes: d5093d961585f02
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220120151609.433555-1-peter.maydell@linaro.org

Update copyright dates to 2022

It's a new year; update the copyright strings for our
help/version/about information and for our documentation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220120124713.288303-1-peter.maydell@linaro.org

* configure and meson fixes
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
-----BEGIN PGP SIGNATURE-----

iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHzwdAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOlMwgApVO6T934TwuTOFBs02Tp8KcjcKQq
5Qf5PrwbsluE8YixJERAFgfxgzbQKL/iHzkP97KoVo3CFFDc1sss7v3mrbbHxbwB
jiYIgbNjRfBbZq7nNmxf2bcXxTpZYvMNEia0QPyNl1GQ0JS/RFOsEYcyVUPvVmAI
djeESRyku1OS5bS5veqE2tL+AWDuodjHeW78qi+yIDRPx3jHLRzuGpQ/3KtgMN6o
d61h5vVrqdxe1HYH/8sh+qU71w7drpNZVYq8PqkZyit/LXgDMyDDOks1XWarrrJE
9xzNBUNR+B6CuHtNw1DGk4rvsCBV/F0ZVki6guVGoqG8njF3l6xyqRHPbw==
=2/gW
-----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* configure and meson fixes
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions

# gpg: Signature made Fri 28 Jan 2022 10:13:36 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
configure: fix parameter expansion of --cross-cc-cflags options
qapi: Cleanup SGX related comments and restore @section-size
check-block: replace -makecheck with TAP output
qemu-iotests: require at least an argument to check-block.sh
build: make check-block a meson test
scripts/mtest2make: add support for SPEED=thorough
check-block.sh: passthrough -jN flag of make to -j N flag of check
meson: Use find_program() to resolve the entitlement.sh script
exec/cpu: Make host pages variables / macros 'target agnostic'
meson.build: Use a function from libfdt 1.5.1 for the library check
intc: Unexport InterruptStatsProviderClass-related functions
docker: add msitools to Fedora/mingw cross
build-sys: fix undefined ARCH error
build-sys: fix a meson deprecation warning

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Xen patches

- bug fixes for mapcache and ioreq handling
-----BEGIN PGP SIGNATURE-----

iQEzBAABCgAdFiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAmHyt4IACgkQDPVXL9f7
Va8SVgf+N6uOYoCVooWFk5H6MpXPRGLNw7YB1L5bR1T8DmXef+149p3NaqYuD3Kr
Fz+6Kc1xpRivtfz7psy6ME+VVLQaCL5pYDYvoWBW/EPDJaBIGe6oednY4N0KEPZH
4AqyuLwNZ+xPhv78YMnjmvF6foIiuO712yAwlG7oi+E+wp25SlKi6DaWHlY2U4/F
hRC4CS3fJKUONn+s511EdSYhjZVqC0+Dp5pyAPGShyp7AMFQUV7mKl+lC2E3/gWo
Qudq/VqX/k4dlLt1zudh/qQTUxJA+nddM1a7grvXmgZL0nngdvKyXQHTOv60HYgF
yFC5OkHu9XohxYaY8gQYNreYiqCxeQ==
=p6C5
-----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20220127' into staging

Xen patches

- bug fixes for mapcache and ioreq handling

# gpg: Signature made Thu 27 Jan 2022 15:17:22 GMT
# gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [unknown]
# gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8
# Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF

* remotes/aperard/tags/pull-xen-20220127:
xen-mapcache: Avoid entry->lock overflow
xen-hvm: Allow disabling buffer_io_timer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

configure: fix parameter expansion of --cross-cc-cflags options

Without this fix, any use of --cross-cc-cflags-* causes a message like:
$ ../configure --cross-cc-ppc64le=clang --cross-cc-cflags-ppc64le="-target powerpc64le-unknown-linux-gnu -sysroot ..."
../configure: 1: eval: cross_cc_cflags_--cross-cc-cflags-ppc64le=-target: not found
../configure: 3816: export: cross_cc_cflags_--cross-cc-cflags-ppc64le: bad variable name

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220120173142.2755077-1-matheus.ferst@eldorado.org.br>
[Fix other occurrences too, noted by Philippe Mathieu-Daudé. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qapi: Cleanup SGX related comments and restore @section-size

The SGX NUMA patches were merged into Qemu 7.0 release, we need
clarify detailed version history information and also change
some related comments, which make SGX related comments clearer.

The QMP command schema promises backwards compatibility as standard.
We temporarily restore "@section-size", which can avoid incompatible
API breakage. The "@section-size" will be deprecated in 7.2 version.

Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220120223104.437161-1-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

check-block: replace -makecheck with TAP output

Let "meson test" take care of showing the results of the individual tests,
consistently with other output from "make check V=1".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qemu-iotests: require at least an argument to check-block.sh

This is anyway how check-block.sh is used in practice, and by removing the
list of formats in the script we avoid duplication between meson.build
and check-block.sh.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

build: make check-block a meson test

"meson test" can be asked to run tests verbosely; this makes it usable
also for qemu-iotests's own harness, and it lets "make check-block"
reuse mtest2make.py's infrastructure to find and build test dependencies.

Adjust check-block.sh to use the standard exit code that reports a test
as skipped. Alternatively, in the future we could make it produce TAP
output, which is consistent with all other "make check" tests.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scripts/mtest2make: add support for SPEED=thorough

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

check-block.sh: passthrough -jN flag of make to -j N flag of check

This improves performance of running iotests during "make -jN check".

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223183933.1497037-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

meson: Use find_program() to resolve the entitlement.sh script

Using ../configure without any particular option generates 31 targets
on Darwin, and meson search for the entitlement.sh script 31 times:

Program nm found: YES
Program scripts/undefsym.py found: YES (/opt/homebrew/opt/python@3.9/bin/python3.9 /Code/qemu/scripts/undefsym.py)
Program scripts/feature_to_c.sh found: YES (/bin/sh /Code/qemu/scripts/feature_to_c.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Configuring 50-edk2-i386-secure.json using configuration
Configuring 50-edk2-x86_64-secure.json using configuration

Use find_program() which seems to cache the script path once found.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220122002052.83745-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

QAPI patches patches for 2022-01-27
-----BEGIN PGP SIGNATURE-----
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=gEIj
-----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2022-01-27-v2' into staging

QAPI patches patches for 2022-01-27

# gpg: Signature made Thu 27 Jan 2022 14:19:51 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2022-01-27-v2:
qapi: generate trace events by default
meson: document why we don't generate trace events for tests/ and qga/
docs/qapi-code-gen: update to cover trace events code generation
meson: generate trace events for qmp commands
qapi/commands: Optionally generate trace for QMP commands
qapi/commands: refactor error handling code
qapi/gen: Add FOO.trace-events output module
schemas: add missing vim modeline

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

xen-mapcache: Avoid entry->lock overflow

In some cases, a particular mapcache entry may be mapped 256 times
causing the lock field to wrap to 0. For example, this may happen when
using emulated NVME and the guest submits a large scatter-gather write.
At this point, the entry map be remapped causing QEMU to write the wrong
data or crash (since remap is not atomic).

Avoid this overflow by increasing the lock field to a uint32_t and also
detect it and abort rather than continuing regardless.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20220124104450.152481-1-ross.lagerwall@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>

xen-hvm: Allow disabling buffer_io_timer

commit f37f29d31488 "xen: slightly simplify bufioreq handling" hard
coded setting req.count = 1 during initial field setup before the main
loop. This missed a subtlety that an early exit from the loop when
there are no ioreqs to process, would have req.count == 0 for the return
value. handle_buffered_io() would then remove state->buffered_io_timer.
Instead handle_buffered_iopage() is basically always returning true and
handle_buffered_io() always re-setting the timer.

Restore the disabling of the timer by introducing a new handled_ioreq
boolean and use as the return value. The named variable will more
clearly show the intent of the code.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20211210193434.75566-1-jandryuk@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>

qapi: generate trace events by default

We don't generate trace events for tests/ and qga/ because that it is
not simple and not necessary. We have corresponding comments in both
tests/meson.build and qga/meson.build.

Still to not miss possible future qapi code generation call, and not to
forget to enable trace events generation, let's enable it by default.
So, turn option --gen-trace into opposite --no-trace-events and use new
option only in tests/ and qga/ where we already have good comments why
we don't generate trace events code.

Note that this commit enables trace-events generation for qapi-gen.py
call from tests/qapi-schema/meson.build and storage-daemon/meson.build.
Still, both are kind of noop: tests/qapi-schema/ doesn't seem to
generate any QMP command code and no .trace-events files anyway,
storage-daemon/ uses common QMP command implementations and just
generate empty .trace-events

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-8-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>