Download List

프로젝트 설명

PonyProg is a serial device programmer with a user friendly GUI framework available for Intel Linux and Windows. Its purpose is being able to read from and write to most serial devices. At the moment it supports I²C Bus, Microwire, SPI eeprom, the Atmel AVR, and Microchip PIC micro. Hardware programmer (SI-Prog) schematics are included.

System Requirements

System requirement is not defined
Information regarding Project Releases and Project Resources. Note that the information here is a quote from Freecode.com page, and the downloads themselves may not be hosted on OSDN.

2008-01-07 02:57
2.07c

만해와 ttyS 잠금 장치 이름을 매개 변수입니다. 설치 대화 상자의 확인란을 귀찮은 버그가 수정되었습니다. 보안 비트를 자동으로 읽어 직후 대화 상자가 열립니다없고 이전에 설정이 추가됩니다. 왜냐하면 그들은 혼란과 수정 만들어 장애인 비트 지우기 및 Set 모든 버튼이 제거됩니다. ULTRASLOW 속도 AVR 장치를 낮은 클럭 주파수에 액세스하는 데 유용합니다 INI 파일 버스 속도 매개 변수 ()에 대한 예를 들어, 32kHz에 추가됩니다. AVR ATmega2560과 ATmega2561 지원이 추가됩니다.
Tags: Minor bugfixes
Lock dir and ttyS device name are parameterized. An annoying bug in the check boxes of setup dialog is fixed. An automatic read of security bits is added just after the dialog opens and there are no previous settings. The Clear All and Set All buttons are removed, because they created confusion and modified disabled bits. ULTRASLOW speed is added to the INI file bus speed parameter, which is useful to access AVR devices clocked at low frequencies (e.g. 32KHz). AVR ATmega2560 and ATmega2561 support is added.

2007-05-03 20:48
2.07a

이 릴리스에는 몇 가지 새로운 AVR 장치에 대한 지원을 추가합니다 : ATtiny13, 25, 45, 85, 261, 461 및 861, ATmega44, 88, 168, 164, 324, 644, 640,1280, 그리고 1281, 그리고 AT90can32, 64, 128.
Tags: Minor feature enhancements
This release adds support for several new AVR devices: ATtiny13, 25, 45, 85, 261, 461, and 861, ATmega44, 88, 168, 164, 324, 644, 640,1280, and 1281, and AT90can32, 64, and 128.

2003-07-28 09:44
2.06c

PIC16F87xA 및 PIC16F62x 장치에 대한 실험적 지원이 추가되었습니다. ATtiny26과 ATmega8535/8515와 플래시 프로그래밍 심각한 문제는, 그리고 DT006 인터페이스 사소한 버그가 수정되었습니다 해결되었습니다.
Tags: Major bugfixes
Experimental support for PIC16F87xA and PIC16F62x devices was added. A severe flash programming problem with the ATtiny26 and ATmega8535/8515 was fixed, and a minor bug with the DT006 interface was fixed.

2003-04-05 20:16
2.06a (BETA)

AVR 장치에 대한 지원이 추가되었습니다 : ATtiny26, ATmega32, ATmega8515, ATmega8535, ATmega162, ATmega169. 이러한 새로운 디바이스에 대한 지원이 실험입니다. 일부 버그를 확장 주소를 기록 중입니다 진수 파일에 대한 고정했다. 빠른 컴퓨터에서 타이밍 문제를 해결했다.
Tags: Minor feature enhancements
Support for AVR devices was added: ATtiny26, ATmega32, ATmega8515, ATmega8535, ATmega162, ATmega169. Support for these new devices is experimental. Some bugs regarding loading HEX files with extended address records were fixed. A timing problem on fast computers was fixed.

2002-02-24 23:20
2.05a

이 릴리스의 활성화 ini 매개 변수를 자동 검출 / 자동 검출 및 해제가 LPT와 COM 포트 I 세트 추가 / O를 WinNT/2000 포트 주소 (지금의 LPT 자동으로 찾아냅니다 작품 3BC 주소를 PC에 심지어 주소), 그리고 읽기에 Osc.Calibration 프로그램주기. 지우기 () 오류 -9 선택한 경우 장치에서 구현되지 반환합니다. 도구 모음의 새로운 아이콘으로 디자인되었습니다. 폴란드어 및 스웨덴어로 번역이 추가되었습니다. VerifyAfterWrite ini 매개 변수를 설정하는 추가되었습니다 / 이후의 모든 쓰기를 비활성화되었는지 확인합니다. 나쁜 코드를 생산하는 컴파일러 인해 일부 최적화 (INVERT 라인이 중지되었습니다 ..)이 작동하지 않았다
Tags: Major bugfixes
This release adds an AutoDetect INI parameter to enable/disable autodetect and set LPT and COM port I/O addresses, WinNT/2000 port address autodetect (now LPT works even on a PC with a 3BC address), and Read Osc.Calibration in the Program cycle. Erase() returns an error -9 if not implemented in the selected device. The toolbar has been redesigned with new icons. Polish and Swedish translations have been added. A VerifyAfterWrite INI parameter has been added to enable/disable verify after every write. Some optimization that caused the compiler to produce bad code (INVERT lines didn't work) has been disabled..

Project Resources