editLinux version 2.6.23.15-80.fc7 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Sun Feb 10 16:52:18 EST 2008
Command line: ro root=LABEL=/ rhgb quiet console=ttyS0.9600 console=tty
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000bfeb2000 (usable)
BIOS-e820: 00000000bfeb2000 - 00000000bfec8000 (reserved)
BIOS-e820: 00000000bfec8000 - 00000000bfee7c00 (ACPI data)
BIOS-e820: 00000000bfee7c00 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
Entering add_active_range(0, 0, 160) 0 entries of 3200 used
Entering add_active_range(0, 256, 786098) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used
end_pfn_map = 2359296
DMI 2.5 present.
ACPI: RSDP 000F2AC0, 0024 (r2 DELL )
ACPI: XSDT 000F2B48, 007C (r1 DELL PE_SC3 1 DELL 1)
ACPI: FACP 000F2C60, 00F4 (r3 DELL PE_SC3 1 DELL 1)
ACPI: DSDT BFEC8000, 2545 (r1 DELL PE_SC3 1 INTL 20050624)
ACPI: FACS BFEE7C00, 0040
ACPI: APIC 000F2D54, 007E (r1 DELL PE_SC3 1 DELL 1)
ACPI: SPCR 000F2DD3, 0050 (r1 DELL PE_SC3 1 DELL 1)
ACPI: HPET 000F2E23, 0038 (r1 DELL PE_SC3 1 DELL 1)
ACPI: MCFG 000F2E5B, 003C (r1 DELL PE_SC3 1 DELL 1)
ACPI: WD__ 000F2E97, 0134 (r1 DELL PE_SC3 1 DELL 1)
ACPI: SLIC 000F2FCB, 0024 (r1 DELL PE_SC3 1 DELL 1)
ACPI: ERST BFECA6C8, 0210 (r1 DELL PE_SC3 1 DELL 1)
ACPI: HEST BFECA8D8, 027C (r1 DELL PE_SC3 1 DELL 1)
ACPI: BERT BFECA548, 0030 (r1 DELL PE_SC3 1 DELL 1)
ACPI: EINJ BFECA578, 0150 (r1 DELL PE_SC3 1 DELL 1)
No NUMA configuration found
Faking a node at 0000000000000000-0000000240000000
Entering add_active_range(0, 0, 160) 0 entries of 3200 used
Entering add_active_range(0, 256, 786098) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used
Bootmem setup node 0 0000000000000000-0000000240000000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 2359296
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0 -> 160
0: 256 -> 786098
0: 1048576 -> 2359296
On node 0 totalpages: 2096722
DMA zone: 56 pages used for memmap
DMA zone: 1317 pages reserved
DMA zone: 2627 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767722 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292800 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[32])
IOAPIC[1]: apic_id 5, address 0xfec10000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000bfeb2000 - 00000000bfec8000
swsusp: Registered nosave memory region: 00000000bfec8000 - 00000000bfee7000
swsusp: Registered nosave memory region: 00000000bfee7000 - 00000000bfee8000
swsusp: Registered nosave memory region: 00000000bfee8000 - 00000000c0000000
swsusp: Registered nosave memory region: 00000000c0000000 - 00000000e0000000
swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fe000000
swsusp: Registered nosave memory region: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 41176 bytes of per cpu data
Built 1 zonelists in Zone order. Total pages: 2063149
Policy zone: Normal
Kernel command line: ro root=LABEL=/ rhgb quiet console=ttyS0,9600 console=tty
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
time.c: Detected 2666.764 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x8078000 - 0xc078000
Memory: 8197324k/9437184k available (2420k kernel code, 189564k reserved, 1374k data, 328k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 5336.42 BogoMIPS (lpj=2668211)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 16667269
Detected 16.667 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5333.45 BogoMIPS (lpj=2666727)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU X3230 @ 2.66GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x2
Initializing CPU#2
Calibrating delay using timer specific routine.. 5333.42 BogoMIPS (lpj=2666710)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 2/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU X3230 @ 2.66GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 5333.63 BogoMIPS (lpj=2666815)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 3/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU3: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU X3230 @ 2.66GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2080 bytes
Time: 2:47:43 Date: 02/28/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: Dell Inc.
ACPI: DMI Product Name: PowerEdge R200
ACPI: DMI Product Version:
ACPI: DMI Board Name: 0TY019
ACPI: DMI BIOS Vendor: Dell Inc.
ACPI: DMI BIOS Date: 10/24/2007
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH6 GPIO
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
Time: tsc clocksource has been installed.
pnp: 00:08: ioport range 0x800-0x87f has been reserved
pnp: 00:08: ioport range 0x880-0x8bf has been reserved
pnp: 00:08: ioport range 0x8c0-0x8df has been reserved
pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved
pnp: 00:08: ioport range 0x900-0x900 has been reserved
pnp: 00:08: ioport range 0xc00-0xc0f has been reserved
pnp: 00:08: ioport range 0xc10-0xc1f has been reserved
pnp: 00:08: ioport range 0xca0-0xca7 has been reserved
pnp: 00:09: ioport range 0xca8-0xca8 has been reserved
pnp: 00:09: ioport range 0xcac-0xcac has been reserved
pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: dfa00000-dfbfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:03:02.0
IO window: d000-dfff
MEM window: dfc00000-dfcfffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:02:00.0
IO window: d000-dfff
MEM window: dfc00000-dfcfffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.0
IO window: d000-dfff
MEM window: dfc00000-dfcfffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: dfd00000-dfdfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: dfe00000-dfefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: dff00000-dfffffff
PREFETCH window: d0000000-d7ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 1048576 (order: 12, 25165824 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 1048576 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3150k freed
audit: initializing netlink socket (disabled)
audit(1204166863.635:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 9B511AECEC7AAA8F
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:04:02.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: Device 00:07 activated.
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:04:04.1[B] -> GSI 34 (level, low) -> IRQ 34
0000:04:04.1: ttyS2 at I/O 0xd8c0 (irq = 34) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Magic number: 12:523:764
Freeing unused kernel memory: 328k freed
Write protecting the kernel read-only data: 1016k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000bc60
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bc80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bca0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usb 1-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf9ffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
SCSI subsystem initialized
Fusion MPT base driver 3.04.05
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SAS Host driver 3.04.05
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
mptbase: Initiating ioc0 bringup
ioc0: LSISAS1068E B3: Capabilities={Initiator}
PCI: Setting latency timer of device 0000:01:00.0 to 64
usb 4-5: new high speed USB device using ehci_hcd and address 4
usb 4-5: configuration #1 chosen from 1 choice
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
input: Dell DRAC4 as /class/input/input1
input: USB HID v1.10 Keyboard [Dell DRAC4] on usb-0000:00:1d.0-1
input: Dell DRAC4 as /class/input/input2
input: USB HID v1.10 Mouse [Dell DRAC4] on usb-0000:00:1d.0-1
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
input: Avocent Dell 03R874 as /class/input/input3
input: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.1-2
input: Avocent Dell 03R874 as /class/input/input4
input: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.1-2
scsi0 : ioc0: LSISAS1068E B3, FwRev=00142e00h, Ports=1, MaxQ=511, IRQ=16
scsi 0:0:0:0: Direct-Access ATA WDC WD1600YS-18S 6C07 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA WDC WD1600YS-18S 6C07 PQ: 0 ANSI: 5
scsi 0:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5
sd 0:1:0:0: [sda] 310546432 512-byte hardware sectors (159000 MB)
sd 0:1:0:0: [sda] Write Protect is off
sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 0:1:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:1:0:0: [sda] 310546432 512-byte hardware sectors (159000 MB)
sd 0:1:0:0: [sda] Write Protect is off
sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 0:1:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:1:0:0: [sda] Attached SCSI disk
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
libata version 2.21 loaded.
pata_sil680 0000:04:07.0: version 0.4.7
sil680: 133MHz clock.
ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 32 (level, low) -> IRQ 32
scsi1 : pata_sil680
scsi2 : pata_sil680
ata1: PATA max UDMA/133 cmd 0x000000000001d8a0 ctl 0x000000000001d88a bmdma 0x000000000001d8b0 irq 32
ata2: PATA max UDMA/133 cmd 0x000000000001d8a8 ctl 0x000000000001d88e bmdma 0x000000000001d8b8 irq 32
ata1.00: ATAPI: VIRTUALFLOPPY DRIVE Floppy, , max PIO3
ata1.01: ATAPI: VIRTUALCDROM DRIVE, , max PIO3
ata1.00: configured for PIO3
ata1.01: configured for PIO3
scsi 1:0:0:0: Direct-Access DELL VSF 0123 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Attached SCSI removable disk
scsi 1:0:1:0: CD-ROM DELL VCD 0133 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata3: SATA max UDMA/133 cmd 0x000000000001bc30 ctl 0x000000000001bc2a bmdma 0x000000000001bc40 irq 23
ata4: SATA max UDMA/133 cmd 0x000000000001bc38 ctl 0x000000000001bc2e bmdma 0x000000000001bc48 irq 23
ata3.01: ATAPI: HL-DT-STDVD-ROM GDR-T10N, 1.02, max UDMA/33
ata3.01: applying bridge limits
ata3.01: configured for UDMA/33
scsi 3:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR-T10N 1.02 PQ: 0 ANSI: 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1204166877.981:2): selinux=0 auid=4294967295
scsi 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:1:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: Attached scsi generic sg3 type 0
scsi 1:0:1:0: Attached scsi generic sg4 type 5
scsi 3:0:1:0: Attached scsi generic sg5 type 5
input: PC Speaker as /class/input/input5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
sr 3:0:1:0: Attached scsi CD-ROM sr1
input: Power Button (FF) as /class/input/input6
ACPI: Power Button (FF) [PWRF]
tg3.c:v3.81.1 (October 18, 2007)
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:05:00.0 to 64
eth0: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:19:b9:f9:5e:60
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth1: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:19:b9:f9:5e:61
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
loop: module loaded
floppy0: no floppy controllers found
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 33 (level, low) -> IRQ 33
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
Adding 8385920k swap on /dev/sda2. Priority:-1 extents:1 across:8385920k
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
audit(1204166911.181:3): audit_pid=3963 old=0 by auid=4294967295
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
eth0: no IPv6 routers present
ipmi message handler version 39.1
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0000, dev_id: 0x20)
IPMI kcs interface initialized
ipmi device interface
eth1: no IPv6 routers present
[PageInfo]
LastUpdate: 2008-04-10 18:37:13, ModifiedBy: nabeshin
[Permissions]
view:all, edit:login users, delete/config:doc editors