editBootdata ok (command line is root=/dev/mapper/r200--debian-root ro )
Linux version 2.6.18-6-amd64 (Debian 2.6.18.dfsg.1-18etch1) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sun Feb 10 17:50:19 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000bfeb2000 (usable)
BIOS-e820: 00000000bfeb2000 - 00000000bfec8000 (reserved)
BIOS-e820: 00000000bfec8000 - 00000000bfee7c00 (ACPI data)
BIOS-e820: 00000000bfee7c00 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
ACPI: RSDP (v002 DELL ) @ 0x00000000000f2ac0
ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2b48
ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2c60
ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2d54
ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2dd3
ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2e23
ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2e5b
ACPI: WD__ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2e97
ACPI: SLIC (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2fcb
ACPI: ERST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfecba00
ACPI: HEST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfecbc10
ACPI: BERT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfecb880
ACPI: EINJ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bfecb8b0
ACPI: SSDT (v001 DELL PE_SC3 0x00000011 INTL 0x20050624) @ 0x00000000bfeca545
ACPI: SSDT (v001 DELL PE_SC3 0x00000011 INTL 0x20050624) @ 0x00000000bfeca9bb
ACPI: SSDT (v001 DELL PE_SC3 0x00000011 INTL 0x20050624) @ 0x00000000bfecae31
ACPI: SSDT (v001 DELL PE_SC3 0x00000011 INTL 0x20050624) @ 0x00000000bfecb2a7
ACPI: SSDT (v001 DELL PE_SC3 0x00000010 INTL 0x20050624) @ 0x00000000bfecb71d
ACPI: DSDT (v001 DELL PE_SC3 0x00000001 INTL 0x20050624) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
On node 0 totalpages: 1029338
DMA zone: 3056 pages, LIFO batch:0
DMA32 zone: 767722 pages, LIFO batch:31
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[32])
IOAPIC[1]: apic_id 5, version 32, address 0xfec10000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 1029338
Kernel command line: root=/dev/mapper/r200--debian-root ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2666.765 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x164a000 - 0x564a000
Memory: 4039512k/5242880k available (1927k kernel code, 153072k reserved, 868k data, 176k init)
Calibrating delay using timer specific routine.. 5338.08 BogoMIPS (lpj=10676177)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 16667276
Detected 16.667 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5333.51 BogoMIPS (lpj=10667027)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU X3230 @ 2.66GHz stepping 0b
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x2
Initializing CPU#2
Calibrating delay using timer specific routine.. 5333.84 BogoMIPS (lpj=10667692)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU X3230 @ 2.66GHz stepping 0b
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 5333.56 BogoMIPS (lpj=10667134)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU3: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU X3230 @ 2.66GHz stepping 0b
Brought up 4 CPUs
testing NMI watchdog ... OK.
migration_cost=10,3218
checking if image is initramfs... it is
Freeing initrd memory: 5425k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:04:02.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid IPI0001
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0103
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
PCI-GART: No AMD northbridge found.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:08' and the driver 'system'
pnp: 00:08: ioport range 0x800-0x87f could not be reserved
pnp: 00:08: ioport range 0x880-0x8bf has been reserved
pnp: 00:08: ioport range 0x8c0-0x8df has been reserved
pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved
pnp: 00:08: ioport range 0x900-0x900 has been reserved
pnp: 00:08: ioport range 0xc00-0xc0f has been reserved
pnp: 00:08: ioport range 0xc10-0xc1f has been reserved
pnp: 00:08: ioport range 0xca0-0xca7 has been reserved
pnp: match found with the PnP device '00:09' and the driver 'system'
pnp: 00:09: ioport range 0xca8-0xca8 has been reserved
pnp: 00:09: ioport range 0xcac-0xcac has been reserved
pnp: match found with the PnP device '00:0a' and the driver 'system'
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: dfa00000-dfbfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:03:02.0
IO window: d000-dfff
MEM window: dfc00000-dfcfffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:02:00.0
IO window: d000-dfff
MEM window: dfc00000-dfcfffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.0
IO window: d000-dfff
MEM window: dfc00000-dfcfffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: dfd00000-dfdfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: dfe00000-dfefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: dff00000-dfffffff
PREFETCH window: d0000000-d7ffffff
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.4 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1207844503.504:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie03]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:06' and the driver 'serial'
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: match found with the PnP device '00:07' and the driver 'serial'
pnp: Res cnt 2
pnp: res cnt 2
pnp: Encode io
pnp: Encode irq
pnp: Device 00:07 activated.
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
GSI 18 sharing vector 0xE1 and IRQ 18
ACPI: PCI Interrupt 0000:04:04.1[B] -> GSI 34 (level, low) -> IRQ 225
0000:04:04.1: ttyS2 at I/O 0xd8c0 (irq = 225) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: the driver 'i8042 aux' has been registered
pnp: the driver 'i8042 kbd' has been unregistered
pnp: the driver 'i8042 aux' has been unregistered
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 176k freed
USB Universal Host Controller Interface driver v3.0
GSI 19 sharing vector 0xE9 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000bc60
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Fusion MPT base driver 3.04.01
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SAS Host driver 3.04.01
GSI 20 sharing vector 0x32 and IRQ 20
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 50, io base 0x0000bc80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 233, io base 0x0000bca0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 233, io mem 0xdf9ffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
tg3.c:v3.65 (August 07, 2006)
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:05:00.0 to 64
eth0: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:19:b9:f9:5f:5c
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[1] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth1: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:19:b9:f9:5f:5d
eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[1] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
mptbase: Initiating ioc0 bringup
libata version 2.00 loaded.
usb 4-5: new high speed USB device using ehci_hcd and address 3
usb 4-5: configuration #1 chosen from 1 choice
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
ioc0: SAS1068E: Capabilities={Initiator}
PCI: Setting latency timer of device 0000:01:00.0 to 64
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : ioc0: LSISAS1068E, FwRev=00142e00h, Ports=1, MaxQ=511, IRQ=169
Vendor: SEAGATE Model: ST3146855SS Rev: S527
Type: Direct-Access ANSI SCSI revision: 05
Vendor: SEAGATE Model: ST3146855SS Rev: S527
Type: Direct-Access ANSI SCSI revision: 05
Vendor: Dell Model: VIRTUAL DISK Rev: 1028
Type: Direct-Access ANSI SCSI revision: 05
SiI680: IDE controller at PCI slot 0000:04:07.0
GSI 21 sharing vector 0x3A and IRQ 21
ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 32 (level, low) -> IRQ 58
SiI680: chipset revision 2
SiI680: BASE CLOCK == 133
SiI680: 100% native mode on irq 58
ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
usbcore: registered new driver hiddev
SCSI device sda: 285155328 512-byte hdwr sectors (146000 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 08
SCSI device sda: drive cache: write through
SCSI device sda: 285155328 512-byte hdwr sectors (146000 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 08
SCSI device sda: drive cache: write through
sda: sda1 sda2 < sda5 >
sd 0:1:0:0: Attached scsi disk sda
GSI 22 sharing vector 0x42 and IRQ 22
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xBC30 ctl 0xBC2A bmdma 0xBC40 irq 66
ata2: SATA max UDMA/133 cmd 0xBC38 ctl 0xBC2E bmdma 0xBC48 irq 66
scsi1 : ata_piix
ATA: abnormal status 0x7F on port 0xBC37
ATA: abnormal status 0x7F on port 0xBC37
ata1.01: ATAPI, max UDMA/33
ata1.01: applying bridge limits
ata1.01: configured for UDMA/33
scsi2 : ata_piix
hda: VIRTUALFLOPPY DRIVE Floppy, ATAPI FLOPPY drive
ATA: abnormal status 0x7F on port 0xBC3F
Vendor: HL-DT-ST Model: DVD-ROM GDR-T10N Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 05
hdb: VIRTUALCDROM DRIVE, ATAPI CD/DVD-ROM drive
hda: set_drive_speed_status: status=0x40 { DriveReady }
hdb: set_drive_speed_status: status=0x40 { DriveReady }
ide0 at 0xffffc20000032f80-0xffffc20000032f87,0xffffc20000032f8a on irq 58
Probing IDE interface ide1...
Uniform CD-ROM driver Revision: 3.20
input: Dell DRAC4 as /class/input/input0
input: USB HID v1.10 Keyboard [Dell DRAC4] on usb-0000:00:1d.0-1
input: Dell DRAC4 as /class/input/input1
input: USB HID v1.10 Mouse [Dell DRAC4] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Probing IDE interface ide1...
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr0
scsi 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:1:0:0: Attached scsi generic sg2 type 0
sr 1:0:1:0: Attached scsi generic sg3 type 5
input: PC Speaker as /class/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ide-floppy driver 0.99.newide
hda: 0kB, 32846/0/0 CHS, 0 kBps, 0 sector size, 0 rpm
floppy0: no floppy controllers found
EXT3 FS on dm-0, internal journal
loop: loaded (max 8 devices)
hda: Invalid capacity for disk in drive
hda: 386184kB, 51573/255/255 CHS, 2192 kBps, 65535 sector size, 385 rpm
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 5574648k swap on /dev/mapper/r200--debian-swap_1. Priority:-1 extents:1 across:5574648k
PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100546, writing 100146)
ACPI: Power Button (FF) [PWRF]
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
[PageInfo]
LastUpdate: 2008-04-10 18:34:06, ModifiedBy: nabeshin
[Permissions]
view:all, edit:login users, delete/config:doc editors