x264CommandLine - HandBrake 일본어판 Wiki - HandBrake 일본어판

x264のコマンドラインオプション

HandBrake 0.9.4で使われているx264のコマンドラインオプション

x264 core:79 r1347 5ddd61b
Syntax: x264 [options] -o outfile infile [widthxheight]

Infile can be raw YUV 4:2:0 (in which case resolution is required),
  or YUV4MPEG 4:2:0 (*.y4m),
  or AVI or Avisynth if compiled with AVIS support (no).
Outfile type is selected by filename:
 .264 -> Raw bytestream
 .mkv -> Matroska
 .flv -> Flash Video
 .mp4 -> MP4 if compiled with GPAC support (no)

Options:

  -h, --help                  List basic options
      --longhelp              List more options
      --fullhelp              List all options

Example usage:

      Constant quality mode:
            x264 --crf 24 -o output input

      Two-pass with a bitrate of 1000kbps:
            x264 --pass 1 --bitrate 1000 -o output input
            x264 --pass 2 --bitrate 1000 -o output input

      Lossless:
            x264 --crf 0 -o output input

      Maximum PSNR at the cost of speed and visual quality:
            x264 --preset placebo --tune psnr -o output input

      Constant bitrate at 1000kbps with a 2 second-buffer:
            x264 --vbv-bufsize 2000 --bitrate 1000 -o output input

Presets:

      --profile               Force H.264 profile [high]
                                  Overrides all settings
                                  - baseline,main,high
      --preset                Use a preset to select encoding settings [medium]
                                  Overridden by user settings
                                  - ultrafast,veryfast,faster,fast,medium
                                  - slow,slower,veryslow,placebo
      --tune                  Tune the settings for a particular type of source
                                  Overridden by user settings
                                  - film,animation,grain,psnr,ssim
                                  - fastdecode,touhou
      --slow-firstpass        Don't use faster settings with --pass 1

Frame-type options:

  -I, --keyint <integer>      Maximum GOP size [250]
  -i, --min-keyint <integer>  Minimum GOP size [25]
      --no-scenecut           Disable adaptive I-frame decision
      --scenecut <integer>    How aggressively to insert extra I-frames [40]
  -b, --bframes <integer>     Number of B-frames between I and P [3]
      --b-adapt               Adaptive B-frame decision method [1]
                                  Higher values may lower threading efficiency.
                                  - 0: Disabled
                                  - 1: Fast
                                  - 2: Optimal (slow with high --bframes)
      --b-bias <integer>      Influences how often B-frames are used [0]
      --b-pyramid <string>    Keep some B-frames as references [none]
                                  - none: Disabled
                                  - strict: Strictly hierarchical pyramid
                                  - normal: Non-strict (not Blu-ray compatible)
      --no-cabac              Disable CABAC
  -r, --ref <integer>         Number of reference frames [3]
      --no-deblock            Disable loop filter
  -f, --deblock <alpha:beta>  Loop filter parameters [0:0]
      --slices <integer>      Number of slices per frame; forces rectangular
                              slices and is overridden by other slicing options
      --slice-max-size <integer> Limit the size of each slice in bytes
      --slice-max-mbs <integer> Limit the size of each slice in macroblocks
      --interlaced            Enable pure-interlaced mode
      --constrained-intra     Enable constrained intra prediction.

Ratecontrol:

  -q, --qp <integer>          Force constant QP (0-51, 0=lossless)
  -B, --bitrate <integer>     Set bitrate (kbit/s)
      --crf <float>           Quality-based VBR (0-51, 0=lossless) [23.0]
      --rc-lookahead <integer> Number of frames for frametype lookahead [40]
      --vbv-maxrate <integer> Max local bitrate (kbit/s) [0]
      --vbv-bufsize <integer> Set size of the VBV buffer (kbit) [0]
      --vbv-init <float>      Initial VBV buffer occupancy [0.9]
      --qpmin <integer>       Set min QP [10]
      --qpmax <integer>       Set max QP [51]
      --qpstep <integer>      Set max QP step [4]
      --ratetol <float>       Tolerance of ABR ratecontrol and VBV [1.0]
      --ipratio <float>       QP factor between I and P [1.40]
      --pbratio <float>       QP factor between P and B [1.30]
      --chroma-qp-offset <integer>  QP difference between chroma and luma [0]
      --aq-mode <integer>     AQ method [1]
                                  - 0: Disabled
                                  - 1: Variance AQ (complexity mask)
                                  - 2: Auto-variance AQ (experimental)
      --aq-strength <float>   Reduces blocking and blurring in flat and
                              textured areas. [1.0]

  -p, --pass <1|2|3>          Enable multipass ratecontrol
                                  - 1: First pass, creates stats file
                                  - 2: Last pass, does not overwrite stats file
                                  - 3: Nth pass, overwrites stats file
      --stats <string>        Filename for 2 pass stats ["x264_2pass.log"]
      --no-mbtree             Disable mb-tree ratecontrol.
      --qcomp <float>         QP curve compression [0.60]
      --cplxblur <float>      Reduce fluctuations in QP (before curve compression) [20.0]
      --qblur <float>         Reduce fluctuations in QP (after curve compression) [0.5]
      --zones <zone0>/<zone1>/...  Tweak the bitrate of regions of the video
                              Each zone is of the form
                                  <start frame>,<end frame>,<option>
                                  where <option> is either
                                      q=<integer> (force QP)
                                  or  b=<float> (bitrate multiplier)
      --qpfile <string>       Force frametypes and QPs for some or all frames
                              Format of each line: framenumber frametype QP
                              QP of -1 lets x264 choose. Frametypes: I,i,P,B,b.
                              QPs are restricted by qpmin/qpmax.

Analysis:

  -A, --partitions <string>   Partitions to consider ["p8x8,b8x8,i8x8,i4x4"]
                                  - p8x8, p4x4, b8x8, i8x8, i4x4
                                  - none, all
                                  (p4x4 requires p8x8. i8x8 requires --8x8dct.)
      --direct <string>       Direct MV prediction mode ["spatial"]
                                  - none, spatial, temporal, auto
      --no-weightb            Disable weighted prediction for B-frames
      --weightp               Weighted prediction for P-frames [2]
                              - 0: Disabled
                              - 1: Blind offset
                              - 2: Smart analysis
      --me <string>           Integer pixel motion estimation method ["hex"]
                                  - dia: diamond search, radius 1 (fast)
                                  - hex: hexagonal search, radius 2
                                  - umh: uneven multi-hexagon search
                                  - esa: exhaustive search
                                  - tesa: hadamard exhaustive search (slow)
      --merange <integer>     Maximum motion vector search range [16]
      --mvrange <integer>     Maximum motion vector length [-1 (auto)]
      --mvrange-thread <int>  Minimum buffer between threads [-1 (auto)]
  -m, --subme <integer>       Subpixel motion estimation and mode decision [7]
                                  - 0: fullpel only (not recommended)
                                  - 1: SAD mode decision, one qpel iteration
                                  - 2: SATD mode decision
                                  - 3-5: Progressively more qpel
                                  - 6: RD mode decision for I/P-frames
                                  - 7: RD mode decision for all frames
                                  - 8: RD refinement for I/P-frames
                                  - 9: RD refinement for all frames
                                  - 10: QP-RD - requires trellis=2, aq-mode>0
      --psy-rd                Strength of psychovisual optimization ["1.0:0.0"]
                                  #1: RD (requires subme>=6)
                                  #2: Trellis (requires trellis, experimental)
      --no-psy                Disable all visual optimizations that worsen
                              both PSNR and SSIM.
      --no-mixed-refs         Don't decide references on a per partition basis
      --no-chroma-me          Ignore chroma in motion estimation
      --no-8x8dct             Disable adaptive spatial transform size
  -t, --trellis <integer>     Trellis RD quantization. Requires CABAC. [1]
                                  - 0: disabled
                                  - 1: enabled only on the final encode of a MB
                                  - 2: enabled on all mode decisions
      --no-fast-pskip         Disables early SKIP detection on P-frames
      --no-dct-decimate       Disables coefficient thresholding on P-frames
      --nr <integer>          Noise reduction [0]

      --deadzone-inter <int>  Set the size of the inter luma quantization deadzone [21]
      --deadzone-intra <int>  Set the size of the intra luma quantization deadzone [11]
                                  Deadzones should be in the range 0 - 32.
      --cqm <string>          Preset quant matrices ["flat"]
                                  - jvt, flat
      --cqmfile <string>      Read custom quant matrices from a JM-compatible file
                                  Overrides any other --cqm* options.
      --cqm4 <list>           Set all 4x4 quant matrices
                                  Takes a comma-separated list of 16 integers.
      --cqm8 <list>           Set all 8x8 quant matrices
                                  Takes a comma-separated list of 64 integers.
      --cqm4i, --cqm4p, --cqm8i, --cqm8p
                              Set both luma and chroma quant matrices
      --cqm4iy, --cqm4ic, --cqm4py, --cqm4pc
                              Set individual quant matrices

Video Usability Info (Annex E):
The VUI settings are not used by the encoder but are merely suggestions to
the playback equipment. See doc/vui.txt for details. Use at your own risk.

      --overscan <string>     Specify crop overscan setting ["undef"]
                                  - undef, show, crop
      --videoformat <string>  Specify video format ["undef"]
                                  - component, pal, ntsc, secam, mac, undef
      --fullrange <string>    Specify full range samples setting ["off"]
                                  - off, on
      --colorprim <string>    Specify color primaries ["undef"]
                                  - undef, bt709, bt470m, bt470bg
                                    smpte170m, smpte240m, film
      --transfer <string>     Specify transfer characteristics ["undef"]
                                  - undef, bt709, bt470m, bt470bg, linear,
                                    log100, log316, smpte170m, smpte240m
      --colormatrix <string>  Specify color matrix setting ["undef"]
                                  - undef, bt709, fcc, bt470bg
                                    smpte170m, smpte240m, GBR, YCgCo
      --chromaloc <integer>   Specify chroma sample location (0 to 5) [0]

Input/Output:

  -o, --output                Specify output file
      --stdout                Specify stdout format ["raw"]
                                  - raw, mkv, flv
      --stdin                 Specify stdin format ["yuv"]
                                  - yuv, y4m
      --sar width:height      Specify Sample Aspect Ratio
      --fps <float|rational>  Specify framerate
      --seek <integer>        First frame to encode
      --frames <integer>      Maximum number of frames to encode
      --level <string>        Specify level (as defined by Annex A)

  -v, --verbose               Print stats for each frame
      --no-progress           Don't show the progress indicator while encoding
      --quiet                 Quiet Mode
      --psnr                  Enable PSNR computation
      --ssim                  Enable SSIM computation
      --threads <integer>     Force a specific number of threads
      --thread-input          Run Avisynth in its own thread
      --sync-lookahead <integer> Number of buffer frames for threaded lookahead
      --non-deterministic     Slightly improve quality of SMP, at the cost of repeatability
      --asm <integer>         Override CPU detection
      --no-asm                Disable all CPU optimizations
      --visualize             Show MB types overlayed on the encoded video
      --dump-yuv <string>     Save reconstructed frames
      --sps-id <integer>      Set SPS and PPS id numbers [0]
      --aud                   Use access unit delimiters